Click on Image for Large View

SAMPLING BOOTH

Product Code: (SE-170A)

Dispensing/Sampling Booth provides a safe, HEPA Filtered environment, for the dispensing of hazardous drug powders. Air is pulled away from user thru rear-wall pre-filters, trapping powders; recirculating air through ceiling mounted high efficiency particulate air (HEPA) filter rated 99.99% efficient at 0.3 microns.) protects the operators from toxic chemicals / raw materials used for manufacturing of tablets, medicines, capsules etc from external contamination during the process of weighing or measuring. It is ideal where a high degree of flexibility is desired. Containment is achieved by air movement. The product also known as Pharmaceutical Sampling Booth and Pharmaceutical Dispensing Booth.

 

Inquire Now

Special Features:

  • Designed in accordance with WHO-GMP.
  • 3-Stage Filtration like Prefilter , Fine Filter , HEPA filter .
  • Heavy duty Low noise motor blower assembly .
  • Suitable to accommodate to floor & table top for keeping weight machine5. Negative pressure inside the booth prevents the escape of fine powder from the work area.
  • Fully integrated system.
  • Easy installation & economical.
  • Stainless steel AISI 304 structure.
  • Dynamic gasket to guarantee the perfect sealing of the filters.
  • Down cross is equipped with N°3 fans with AC frequency control.
  • Corrosion resistant exterior and interior.
  • Sturdy construction

Operating Principle:

The air forced downwards is extracted at low level into the booth's filtration system where dust particles are contained at each level of filtration prior to being re-circulated back into the booths' air stream. When the Booths is operating under normal conditions air is pulled through the main working chamber to exhaust grills, normally situated in the rear of the Booths, suppressing air-borne dust away from the operators breathing zone.

Construction Details:

All Powder Dispensing / Sampling Booths are available in the following materials of construction depending upon customer’s choice.

  • G.I. with Powder Coated finish.
  • Fully Stainless Steel with satin finish (Gr-304 / Gr-316)

Technical Specifciations:

Type

Front Open

Direction of flow

Vertical

Material of Construction

SS304 / SS316 or G I Powder Coated

Cleanliness

Class 100 as per US FED STD 209E (IS 14644-1)

Particle Retention

0.3 micron

Noise Level

65dB

Velocity

120 FPM ± 20%

Illumination

Fluorescent tubes diffusers

Light intensity

800 LUX

Power Supply

230V Single Phase, 50 Hz

Motor / Blower assembly

Direct drive continuous duty ¼ HP with sealed bearings.

Filters

Aluminum framed HEPA filters with a minimum efficiency of 99.99% at 0.3 micron.

Optional Features:

  • Magnhelic Gauge (to track filter pressure)